MRE Pin Number	TS Name	Type	VFR	Typical Function	Pigtail Color	ext wire color	Subharness Connector
1	Battery Sense	12V	B8	12V Supply from main relay output, see also pin 29. DO NOT FORGET ABOUT PIN 5.	white right	RED	B14
2		pgnd	A9/A20	Power GND	white	BLACK	G12
3	3 - Lowside 2	ls		Idle solenoid	white	NC
4		etb		ETB+	white	NC
5		12V	B8	12V supply from Key (turn on/off power) primary source of +12v	black	RED	B5
6		pgnd	B1	Power GND	black	BLACK	B4
7	7 - Lowside 1	ls		VVT	black	NC
8		etb		ETB-	black	NC
9	9 - Ignition 1	ign	A10	Ignition 1	dark blue	green	G1
10	10 - Ignition 2	ign	A21	Ignition 2	dark blue	green	G6
11	11 - Ignition 3	ign	A11	Ignition 3	dark blue	green	G2
12	12 - Ignition 4	ign	A22	Ignition 4	dark blue	green	G7
13	13 - GP Out 6	gp_high	A18	Alternator (see JP2 jumper note)	yellow	yellow	G5
14	14 - GP Out 5	gp_high		(see JP2 jumper note)	yellow	NC
15		usb		USB white wire https://youtu.be/4v2VnP-YdlQ	yellow	NC
16		usb		USB green wire https://youtu.be/4v2VnP-YdlQ	yellow	NC
17		sgnd	B2	Signal GND	red right	ORANGE	na
18	18 - AN temp 1	at	B15	CLT sensor	red	white	7
19	19 - AN volt 4	av		Starting from version 0.5.0 this pin can be used as 5V input for USB connection through main connector (No need to open case to access micro-USB connector) WATCH OUT FOR D7	red	NC
20	20 - AN volt 5	av	B14	Throttle position sensor (TPS)	red left	white	8
21		sgnd	B12/B2	Signal GND	dark green	ORANGE	B1
22	22 - AN temp 4 or Hall Input	at			dark green	NC
23	23 - AN temp 2	at	B5	IAT sensor or SENT input!	dark green	white	B10
24	24 - AN temp 3 or Hall Input	at			dark green	NC
25	25 - Hall Cam	hall	B17	SPEED SENSOR	light blue right	white	6
26	26 - AN volt 2	av		TPS2	light blue	NC
27	27 - AN volt 1	av	B3	MAP sensor	light blue	gray	B12
28	28 - AN volt 10, Aux Reuse	av	B4	AN volt 10, for aux see R85	light blue left	gray	B11
29		mr	NC	Main relay control signal (low side)	pink right	blue
30	30 - AN volt 7	av		Throttle Pedal Position Sensor 2 (PPS2)	pink	NC
31	31 - AN volt 3	av		Throttle Pedal Position Sensor (PPS)	pink	NC
32	32 - AN volt 6, Aux Reuse	av		External wideband O2 sensor WBO AFR EGO, for aux see R86	pink	NC
33	33 - GP Out 3	gp_low, gp_pp		(IDLE stepper coil 2+)	orange right	NC
34	34 - GP Out 2	gp_low, gp_pp	A5 fuelpump	Fan relay (IDLE stepper coil 1-)	orange	orange	G10
35	35 - GP Out 1	gp_low, gp_pp	A7filight	Fuel pump relay (IDLE stepper coil 1+)	orange	orange	G11
36	36 - AN volt 8, Aux Reuse	av		AN volt 8, for aux see R84	orange left	NC
37	37 - Injector 1	inj	A4	Injector 1	grey right	Yellow	G9
38	38 - Injector 2	inj	A15	Injector 2	grey	Yellow	G4
39		5v	B7	MAP sensor supply	grey	blue	B9
40	40 - AN volt 9, Aux Reuse	av		AN volt 9 without R30, low side output with R30	grey	NC
41	41 - Injector 3	inj	A3	Injector 3	brown right	Yellow	G8
42	42 - Injector 4	inj	A14	Injector 4	brown	Yellow	G3
43	43 - GP Out 4	gp_low, gp_pp		(IDLE stepper coil 2+)	brown	NC
44		5v	B7	TPS sensor supply	brown left	blue	B13
45	45 - VR/Hall Crank	vr hall	B11	Crank VR+/hall	light green right	green	B3
46		vr	B12	Crank VR- (do not connect if hall)	light green	orange	B2
47		can		CAN bus Low	light green	NC
48		can		CAN bus High	light green	NC